你现在的位置:首页>企业动态>

打胶机的利用率提高更高水平的方式

浏览:
很多时候打胶机卖给客户后,其使用寿命往往得不到很好的保证。机器设备的运行会大大降低打胶机的寿命。后期打胶机的维修保养也很重要。今天给大家介绍一下如何将打胶机的利用率提高到一个更高的水平。
In many cases, the service life of the glue applicator cannot be well guaranteed after it is sold to customers. The operation of the machine and equipment will greatly reduce the service life of the glue applicator. It is also very important to maintain the glue applicator in the later stage. Today, I'd like to introduce how to improve the utilization rate of the glue applicator to a higher level.
双组份打胶机的车间保持适当温度,打胶机各个零部件的温度都有各自的正常范围。一般情况下设备在低温下运行小锅较好,所以我们的打胶机每天在规定温度后再运行,就会减少温度对设备的影响。在平时的工作中,要注意检查打胶机设备系统的工作状况,作业的时候保证散热通畅。
The workshop of the two-component glue applicator shall maintain an appropriate temperature, and the temperature of each part of the glue applicator shall have its own normal range. Generally, it is better for the equipment to operate in a small pot at low temperature, so our glue applicator operates after the specified temperature every day, which will reduce the impact of temperature on the equipment. During normal work, pay attention to check the working condition of the glue applicator equipment system, and ensure smooth heat dissipation during operation.
减少胶水材料杂质的影响。打胶机在运行的时候要跟原材料和胶水相接触,那就会产生一些胶水残渣和磨损产物等。这些杂物黏糊在设备上,虽然不会造成很大的伤害,但是会使打胶机运行的时候出现阻滞,影响点胶效率。所以我们进行点胶也要经常做好擦拭工作,清掉胶水残渣以及原材料残余等。
Reduce the influence of glue material impurities. When the glue applicator is running, it should contact with raw materials and glue, which will produce some glue residues and wear products. These sundries stick to the equipment, which will not cause great damage, but will block the operation of the glue dispenser and affect the dispensing efficiency. Therefore, we should always do a good job in wiping when dispensing glue, and remove the glue residue and raw material residue.
每天的工作量不要太多。机器虽然是用电的,但是你知道电器类都有自己的工作载荷,如果连续超负荷工作,那机器的散热等各方面性能可能就不会那么好了,那也就会出现耗损,就跟人的身体一样,熬不住了就是亏空身体。所以我们不要长期让打胶机超负荷工作,那样你会发现故障发生率明显增多,工作指标质量也会减少,还会让打胶机“提前退休”。
Don't work too much every day. Although the machine uses electricity, you know that all electrical appliances have their own working loads. If the machine is continuously overloaded, its performance in terms of heat dissipation and other aspects may not be so good, which will lead to wear and tear. Just like the human body, if it cannot endure, it will be a loss of body. Therefore, we should not let the glue applicator work overload for a long time. In that case, you will find that the failure rate will increase significantly, the quality of work indicators will also decrease, and the glue applicator will "retire early".
济南双组份打胶机
机台长时间停用时应当拔下电源,这样不仅能使机器的寿命延长而且还会省下来不少的电费。随着日新月异的工业发展的需要,液体控制技术和点胶设备也在不断的发展到超高精密控制和多样化及化。
Unplug the power supply when the machine is out of service for a long time, which can not only prolong the service life of the machine, but also save a lot of electricity. With the rapid development of industry, liquid control technology and dispensing equipment are constantly developing to ultra-high precision control, diversification and specialization.
更换胶种,需清洗管路。此时先关闭进料阀,打开排料阀,将胶桶剩余胶料排出后,关闭排料阀打开进料阀将清洗溶剂倒入储胶桶内,激活机体,按平时操作方式将溶剂压出冲洗。
To replace the rubber type, clean the pipeline. At this time, first close the feed valve, open the discharge valve, discharge the remaining rubber in the rubber barrel, close the discharge valve, open the feed valve, pour the cleaning solvent into the rubber storage barrel, activate the machine body, and press the solvent out for washing according to the normal operation mode.
济南双组份打胶机的机台部分请定期擦拭干净,以增加使用寿命。混合在一起的胶量越多,其反应就越快,固化速度也会越快,所以要根据实际生产情况进行合理配胶,否则造成胶水的浪费。排除意外,提高生产效率。如今液体控制技术和点胶设备广泛地应用到现代工业中的各种生产领域。此外,打胶机在每次使用后都要做好清洁工作,用酒精擦洗可见部分,经常运动的部分需要上机油或者黄油润滑。
Please wipe the machine part of Jinan two-component glue applicator regularly to increase its service life. The more glue is mixed together, the faster the reaction will be and the faster the curing speed will be. Therefore, the glue shall be mixed reasonably according to the actual production situation, otherwise the glue will be wasted. Eliminate accidents and improve production efficiency. Nowadays, liquid control technology and dispensing equipment are widely used in various production fields in modern industry. In addition, the glue applicator shall be cleaned after each use. The visible parts shall be wiped with alcohol. The frequently moving parts shall be lubricated with engine oil or butter.
实际上日常工作做到位就可以让打胶机用很久的时间,当然您有任何关于产品设备的问题都可以来我们网站www.jntiannuo.com进行咨询!
In fact, the glue applicator can be used for a long time if the daily work is done properly. Of course, you can come to our website www.jntiannuo Com for consultation!

上一篇:双组份打胶机的安装
下一篇:打胶机点胶时的三个常见缺陷

  • 官方微信