你现在的位置:首页>企业动态

汽车车灯冷胶机工作原理以及工作流程

浏览:0
汽车车灯冷胶机是汽车修理厂、汽配店、美容店等用来修补汽车前大灯的专用设备。它具有操作简单、方便,使用灵活等优点,深受广大用户的喜爱。下面就由厂家来给大家讲解一下相关事项吧!
Automobile lamp cold glue machine is a special equipment used to repair automobile headlights in automobile repair shop, auto parts shop, beauty shop, etc. It has the advantages of simple operation, convenience and flexible use, and is deeply loved by the majority of users. Now let's let the manufacturer explain the relevant matters to you!
工作原理:
working principle:
胶水在压力的作用下通过针头喷出并固化在灯壳内壁与玻璃之间的缝隙中。由泵体(含电机)、胶管及针筒三部分组成。
Glue is sprayed through a needle under pressure and solidified in the gap between the inner wall of the lamp housing and the glass. It is composed of pump body (including motor), rubber hose and needle cylinder.
汽车车灯冷胶机
工作流程:
Workflow:
(1)打开电源开关。
(1) Turn on the power switch.
(2)将胶水倒入泵体的贮料桶内。
(2) Pour the glue into the storage bucket of the pump body.
(3)启动机器使电机运转带动齿轮减速器转动。
(3) Start the machine to make the motor run and drive the gear reducer to rotate.
(4)当齿轮减速器的转速达到设定值时。
(4) When the speed of the gear reducer reaches the set value.
(5)按动启动按钮。
(5) Press the start button.
(6)开始灌胶。
(6) Start filling glue.
(7)待到一定时间后。
(7) After a certain time.
(8)停止灌注。
(8) Stop perfusion.
此外在使用前建议您检查各部件连接紧固件是否松动;检查电器元件是否正常;检查电路有无漏电现象。等等,为了着想,要做好相应的事项,关注我们http://www.jntiannuo.com了解更多!
In addition, it is recommended that you check whether the connecting fasteners of each component are loose before use; Check whether electrical components are normal; Check the circuit for leakage. Wait, for the sake of safety, we should do a good job and pay attention to us http://www.jntiannuo.com Learn more!

上一篇:双组份打胶机流速慢或直接打不出胶来的原因
下一篇:全自动边框机的4种常见故障

  • 微信