你现在的位置:首页>企业动态

双液打胶机需要考虑什么问题?

浏览:0
  为了适应不同的需求,市场上的打胶机种类多样,而双液打胶机是目前应用较为广泛的设备,在较多行业中都会有所应用,哪选用双液打胶机需要考虑什么问题?
  In order to meet different needs, there are various types of glue beaters on the market, and the double-liquid glue beater is currently widely used equipment, which will be applied in many industries, which choice of double-liquid glue beater need to consider what issues?
  AB环氧树脂、AB聚氨酯、AB有机硅等这些胶水都是十分常用,对于使用双液混合点胶粘结效果的需求,选用双液打胶机能比普通打胶机实现更好的效果,双液打胶机能够根据不同的混合胶水比例可以很好的把握胶水的固化时间,从而更利于产线生产的需要!
  AB epoxy resin, AB polyurethane, AB organosilicon and other glue are very common. For the need of using double-liquid mixing point bonding effect, double-liquid glue beater is selected to achieve better effect than ordinary glue beater. Double-liquid glue beater can grasp the curing time of glue according to different proportion of mixed glue, which is more conducive to the needs of production line.
  选用双液打胶机需要考虑的问题:
  Problems to be considered in selecting double-liquid glue beater:
  所用胶水的混合比例:任何一种打胶机对胶水的混合比例都有一个范围,常见的有100:100——100:10;如果所用的胶水不在这个范围,那就要重新考虑了。
  The mixing ratio of glue used: There is a range of mixing ratio of glue used by any type of glue beater. The common mixing ratio is 100:100-100:10. If the glue used is not in this range, it should be reconsidered.
济南双组份打胶机
  胶水里面有没有填料:双液灌胶机控制出胶量的方式有两种,一种是通过齿轮泵,一种是通过螺杆泵!齿轮泵在遇到含有填料的胶水时,时间久了易磨损,进而造成出胶量不准,混合比例不精准,出现点出来的产品长时间不干。螺杆泵相比较而言,较耐磨损一些,这些都是根据需求进行选择!
  Is there any filler in the glue? There are two ways to control the amount of glue produced by the double-liquid glue filling machine, one is through gear pump, the other is through screw pump! When the gear pump encounters the glue containing filler, it is easy to wear and tear for a long time, which results in inaccurate glue output, inaccurate mixing ratio and long time non-drying of the products. Compared with screw pump, it is more wear-resistant, these are based on the needs of choice!
  产品点胶需求:要考虑产品每次限制小的点胶量是多少,比如要点的产品是1克,胶水配比是10:1,那相当于B胶的出胶量要达到0.1克,机器的限制小出胶量是多少,你买机器时就要对比比较,看能否达到要求!
  Demand for dispensing products: Consider the minimum dispensing quantity of each product limit. For example, the key product is 1 gram and the ratio of glue is 10:1. That is equivalent to 0.1 gram of B glue. How much is the glue quantity of the machine limit? When you buy the machine, you should compare and compare it to see if it can meet the requirement or not! _______
  产量效率:生产量大的话可考虑带XYZ机械手,或者多头的打胶机,虽然这样的设备更高,但是亦都能够带来更好的效率。生产量小的话,用单头打胶机,甚不带XYZ机械手的都可完成!
  Production efficiency: If the production capacity is large, consider a XYZ manipulator or a multi-head glue beater. Although such equipment is more expensive, it can also bring better efficiency. If the production is small, it can be accomplished with a single-end glue machine, even without XYZ manipulator.

上一篇:打胶机日常怎样保养比较好?
下一篇:双组份打胶机是由哪几部分组成?

  • 微信