What if there is glass slag when the two-component glue applicator is walking or when the transmission stops?

查看胶嘴的护套是否损坏。

First, check whether the sheath of the rubber nozzle is damaged.

解决方法：换护套。

Solution: replace the sheath.

其次检查铝槽深度检测探头行走时滑到玻璃。

Secondly, check that the aluminum groove depth detection probe slides to the glass when walking.

解决方法：调节探头使其在铝槽的中间行走。

Solution: adjust the probe to walk in the middle of the aluminum groove.

查看挡胶板与刮胶板的前进力量是不是太大。

Finally, check whether the forward force of rubber baffle and rubber scraper is too large.

解决方法：调节前进气缸的速度。

Solution: adjust the speed of the forward cylinder.

双组份打胶机检修的技术一般有如下几种方法：

The maintenance technology of two-component glue applicator generally includes the following methods:

强制修理法：这种方法是针对设备的修理日期、类别和内容预先制定具体计划，并严格按计划进行，而不管设备实际技术状况如何。优点是便于在修理前作好充分准备，并且能够较有效地保证中空玻璃加工设备正常运转。该方法适用于必须严格保证运转的特别重要、复杂的设备，如的玻璃清洗机、双组份打胶机及自动中空玻璃加工流水线上的设备等。

Forced repair method: this method is to make a specific plan in advance for the repair date, category and content of the equipment, and carry out it in strict accordance with the plan, regardless of the actual technical status of the equipment. The utility model has the advantages that it is convenient to make full preparations before repair, and can effectively ensure the normal operation of insulating glass processing equipment. This method is applicable to particularly important and complex equipment that must strictly ensure safe operation, such as high-end glass cleaning machine, two-component gluing machine and equipment on automatic hollow glass processing line.

定期修理法：是据设备实际使用情况，参考有关检修周期，制定设备修理工作的计划日期和大致的修理工作量。这种方法有利于做好修理前准备工作。

Periodic repair method: according to the actual use of the equipment and referring to the relevant maintenance cycle, formulate the planned date and approximate repair workload of the equipment repair. This method is conducive to making preparations before repair.

检查后修理法：这种方法事先规定设备的检查计划，根据检查结果和以前的修理资料，确定修理日期和内容。这种方法简便易行，但掌握不好就会影响修理前的准备工作。

Repair after inspection method: this method specifies the inspection plan of the equipment in advance, and determines the repair date and content according to the inspection results and previous repair data. This method is simple and easy, but if it is not mastered well, it will affect the preparation before repair.

部分修理法：其特点是中空玻璃设备各部件不在同一时间修理，而是按设备独立部分，按顺序分别进行修理．每次只修理其中一部分。这种方法的优点是，由于修理工作量分散，化整为零，因而可利用节假日或非生产时间进行修理，可增加设备的生产时间，提高设备的利用率。

Partial repair method: it is characterized in that all parts of insulating glass equipment are not repaired at the same time, but are repaired separately according to the independent parts of the equipment and in sequence. Only one part is repaired each time. The advantage of this method is that because the repair workload is scattered and divided into parts, it can be repaired in holidays or non production time, increase the production time of the equipment and improve the utilization rate of the equipment.

部件修理法：将需修理的中空玻璃设备部件拆下来，换上事先准备好的同样部件，也就是用简单“插入”、“拉出”的方法更换部件。这种方法的优点是可节省拆装时间，其缺点是需一定数量的备件，占用资金多。

Component repair method: remove the insulating glass equipment components to be repaired and replace them with the same components prepared in advance, that is, replace the components by simple "inserting" and "pulling out". The advantage of this method is that it can save disassembly time, but its disadvantage is that it requires a certain number of spare parts and occupies a lot of money.

同步修理法：指生产过程中在工艺上相互紧密联系的数台中空玻璃设备，安排在同一时间内进行修理，实现修理同步化，以减少分散修理所占的停机时间。

Synchronous repair method: it refers to several insulating glass equipment closely related to each other in the process of production, which are scheduled to be repaired at the same time to realize the synchronization of repair, so as to reduce the downtime occupied by decentralized repair.

双组份打胶机http://www.jntiannuo.com/感谢您的浏览，如有其他疑问欢迎登录我们官网进行查看。

Two component gluer http://www.jntiannuo.com/ Thank you for your browsing. If you have any other questions, please log in to our official website.