双组份打胶机是否可以打三层中空玻璃！
现在我们生产6a9a12a。如果您需要做门窗子架，您需要37a或更大的尺寸。建议选用电机胶带捆扎机。
Now we produce 6a9a12a. If you need to make door and window racks, you need 37a or larger size. It is suggested to use electric tape binding machine.
使用两套完全独立的橡胶供应系统(包括混炼机)和胶枪混炼，对于大尺寸和小尺寸的玻璃加工影响和使用都很小，可以说没有限制。如果你想胶水的话,好的方法是使用中空玻璃自动橡胶机,不需要太高的技术,基本的人民有能力,速度快,橡胶也漂亮,手动涂层是熟练工人,多实践,好的胶主速度也非常快,也非常好看。
The use of two completely independent rubber supply systems (including mixers) and rubber gun mixing has little impact on the maximum and minimum sizes of glass processing and can be said to be unlimited. If you want glue, the best way is to use the hollow glass automatic rubber machine, do not need too high technology, the basic people have the ability, speed, rubber is beautiful, manual coating is skilled workers, more practice, good glue master speed is very fast, also very good.
很多情况下玻璃的尺寸都是正常的，那么对于中空玻璃胶机来说，常见的，只有按照正常的方式和操作流程来做，对于生产玻璃来说是非常简单的，少数情况下会出现异形中空玻璃，那能起到什么作用呢?让我们来分析:
In many cases, the size of glass is normal, so for hollow glass glue machine, the most common, only according to the normal way and operation process to do, for the production of glass is very simple, in a few cases there will be special-shaped hollow glass, what role can that play? Let's analyze:
现场使用因素使玻璃厂做玻璃型材，如果使用的橡胶设备可以保证。
Firstly, on-site use factors make glass factory to make glass profiles, if the use of professional rubber equipment can be guaranteed.
其次，工人在切割玻璃时出现了一个错误，导致玻璃的形状不规则。如果边缘不能磨尖或去除，不要担心。
Secondly, the worker made a mistake in cutting the glass, which resulted in the irregular shape of the glass. If the edges cannot be sharpened or removed, don't worry.
第三块玻璃本来就是异类，没有办法调节尺寸和四周，也没有关系。
The third piece of glass is different in nature. There is no way to adjust the size and surroundings, nor does it matter.
胶枪和胶头由工人控制。玻璃的一端放在胶桌上，可以控制玻璃在不移动人的情况下旋转。如果将异形玻璃固定好，则由人移动胶枪进行战斗，手中胶枪的开关可以配合工作。
Guns and rubber heads are controlled by workers. One end of the glass is placed on the rubber table, which can control the glass to rotate without moving people. If the special-shaped glass is fixed properly, the battle will be carried out by moving the rubber gun, and the switch of the rubber gun in hand can cooperate with the work.
上一篇：中空玻璃打胶机需要检修吗？
下一篇：中空玻璃打胶机可以生产热熔胶式中空玻璃
