你现在的位置:首页>企业动态

双组份打胶机的性能及介绍

浏览:0
气动双组份打胶机是集国内外技术生产的中空玻璃密封胶打胶机,A组分泵和B组分泵胶分别采用气动系统驱动,采用无触点电器控制系统控制,换向灵敏可靠,其独特的方便可调试配比机构,大限度地保证双组份胶近乎苛刻的配比要求,出胶连续均匀,涂胶效果好,生产效率高。
High efficiency pneumatic two-component glue machine is a set of insulating glass sealant production technology at home and abroad the best glue machine, A components and B components of pump pump respectively using pneumatic drive system, electric control system adopts contactless commutation control, sensitive and reliable, its unique convenient adjustable ratio mechanism. To ensure maximum two-component adhesive demanding ratio, glue uniform, good gluing effect, high production efficiency.
打胶操作:
Glue operation:
1)松开比例杠杆上的比例泵锁紧螺钉,将比例泵内外调整所需比例。只有当A胶和B胶的配比达到正常值时,才可进行下面的操作。
1) unlock the proportion pump locking screw on the proportional lever, and adjust the ratio pump to the required proportion. Only when the ratio of A glue and B glue reaches the normal value, the following operation can be carried out.
2)置选择旋钮于A、B泵开,将胶枪出口对准两片玻璃的中缝,打开胶枪开关,以适当速度平稳地移动胶枪使玻璃槽内的双组份胶填满充实为佳。打胶结束时关闭胶枪。
2) set the option knob on A and B pump, open the rubber gun outlet to the two piece of glass seam, open the glue gun switch, and move the glue gun smoothly at a suitable speed, so that the two component glue in the glass tank can be filled and enriched. Turn off the glue gun at the end of the glue.
因双组份胶是由两种胶混合而成的,其凝固速度与环境温度和A、B胶的比例有关,混合后的胶一般在20分钟之内就会反应固化。所以,当设备在正常打胶后,20分钟之内不使用就必须将混合后的胶冲洗出来,以免堵塞混胶器和胶枪。具体操作:将B泵关闭,打开B胶回流开关然后打开胶枪,胶条为白色即可。
Because the two component adhesive is made of two kinds of glue, its solidification speed is related to the ambient temperature and the proportion of A and B glue. After mixing, the glue will react and solidify in 20 minutes. Therefore, when the equipment is not used in 20 minutes after normal glue, the mixed glue must be flushed out in order to avoid blocking the mixer and glue gun. Specific operation: close the B pump, open the B glue reflux switch and open the glue gun to the white glue bar.
感谢大家在百忙之中关注公司发布的产品信息,如果你想要了解更多,可以来我们公司咨询。我们欢迎大家的光临,并与你的合作!
Thank you for paying attention to the product information issued by the company in the busy schedule. If you want to know more, you can come to our company for consultation. We welcome everyone's presence and cooperate with you!

上一篇:双液点胶机的应用及维护方法
下一篇:如何避免双组份打胶机混合不均匀?

  • 微信