你现在的位置:首页>企业动态

中空玻璃加工设备如何保养才正确

浏览:0
中空玻璃加工设备在使用中的保养非常简单,主要是保持滑轮各方面的润滑,保持电压的稳定,防止电器的烧毁。为保证机器的良好运行,应加强机器日常维护与保养,在运行过程中若有异常情况应立即停车检查。排除故障后再重新启动。设备出现较大的的故障时应有经验的人士来维修,在开始检修前切忌关掉总电源。   
The maintenance of insulating glass processing equipment in use is very simple, mainly to maintain the lubrication of pulley in all aspects, maintain the stability of voltage and prevent the burning of electrical appliances. In order to ensure the good operation of the machine, it is necessary to strengthen the daily maintenance and maintenance of the machine. If there is any abnormal situation in the operation process, the machine should be stopped immediately for inspection. Restart after troubleshooting. In case of major equipment failure, experienced personnel shall be responsible for maintenance. Do not turn off the main power supply before maintenance.
1.传动维护:各传送辊轴承、毛刷辊轴承、传送轴承、链轮、齿轮定期加注钙基润滑脂;微型摆线针轮减速机每半年加钙基润滑脂一次;无级调速器每半年换Ub—l或Ub—3型润滑油一次,且在运转过程中应时常检查其油位,保持油位在滑标线以上。
1. Transmission maintenance: calcium base grease shall be added regularly to each transmission roller bearing, brush roller bearing, transmission bearing, sprocket wheel and gear; calcium base grease shall be added to the micro cycloid pin gear reducer once every half a year; ub-l or ub-3 lubricating oil shall be changed for stepless governor every half a year, and the oil level shall be checked frequently during operation to keep the oil level above the center line of sliding mark.

2.水路维护:水箱内循环水应每天更换,水箱每周清洗一次,经常检查喷水嘴喷水情况,项发现堵塞应及时清理。
2. Waterway maintenance: the circulating water in the water tank should be replaced every day, and the water tank should be cleaned once a week. The water spraying condition of the spray nozzle should be checked regularly. If any blockage is found, it should be cleaned up in time.
3.风路维护:定期检查风机运行情况,如有异常声音应立即停机检查,定期清洗风机过滤栅,减小引风阻力,提高风干后玻璃表面洁净度。
3. Air path maintenance: check the operation of the fan regularly. If there is abnormal sound, stop the fan immediately for inspection. Clean the filter screen of the fan regularly to reduce the induced air resistance and improve the cleanliness of the glass surface after air drying.
以上就是济南双组份打胶机为您介绍的关于中空玻璃设备的相关内容,希望客户帮助到您!如您有更多的疑问可以关注公司网站:http://www.jntiannuo.com会有在线客服为您进行解答。
The above is about the insulating glass equipment introduced by Jinan two-component gluing machine. We hope customers can help you! If you have more questions, please pay attention to the company's website: http://www.jntiannuo.com There will be online customer service for you to answer.

上一篇:选择中空玻璃生产线的注意事项
下一篇:双液浇注机如何防止胶水沉淀?

  • 微信