你现在的位置:首页>企业动态>

PU打胶机日常保养的好坏!

浏览:
  PU上胶机工作特点:
  Working characteristics of PU gluing machine:
  1. 具有绘制点、线、弧、园、不规则曲线、连续补间输入程序等功能,可实现三维布图;
  1. It has the functions of drawing points, lines, arcs, circles, irregular curves, continuous interpolation input program and so on. It can realize three-dimensional layout.
  任意点、线、面、弧等不规则曲线连续构成sassafras函数。
  The Sassafras function is composed of irregular curves such as arbitrary points, lines, surfaces and arcs.
  4、高速、低噪声调速无刷直流电动机配药效果更好。
  4. The dispensing effect of high speed and low noise speed regulating brushless DC motor is better.
  5. 静电消除器能在±100V内消除静电
  5. Electrostatic eliminator can eliminate static electricity within (+100V)
  6. 配药力自动补偿功能,操作更方便。
  6. The automatic compensation function of dispensing power makes the operation more convenient.
  7:面阵xy,平移旋转操作功能,反转料板,适合不同工作定位。
  7: area array xy, translation and rotation operation function, inversion material plate, suitable for different work positioning.
  双液点胶机的日常保养工作对点胶机的使用寿命包括在日常使用中的平稳状态都有较大的影响,所以让我们了解一下如何在日常使用中保养点胶机。
  Daily maintenance of double-liquid dispensing machine has a great impact on the service life of dispensing machine, including the smooth state in daily use, so let's know how to maintain dispensing machine in daily use.
济南双组份打胶机
  1. 更换橡胶,清洗管道。此时,首先关闭进给阀,打开出料阀,将剩余的橡胶物料从橡胶桶中排出。然后关闭出料阀,打开进给阀,将清洗溶剂倒入胶桶中,激活机体,按常规操作方式将溶剂挤出冲洗。
  1. Replace rubber and clean pipes. At this time, the first step is to close the feed valve, open the discharge valve, and discharge the remaining rubber material from the rubber barrel. Then close the discharge valve, open the feed valve, pour the cleaning solvent into the rubber drum, activate the body, and extrude and rinse the solvent according to the conventional operation mode.
  2. 如进气压力异常,有水蒸汽,请将调压滤清器中的水蒸汽取出或检查气源是否有差异。
  2. If the inlet pressure is abnormal and there is water vapor, please take out the water vapor in the pressure-regulating filter or check whether the gas source is different.
  3.请定期清洗机器部件,延长使用寿命。
  3. Please wash machine parts regularly to prolong service life.
  4. 当机器长时间停机时,应拔掉电源,这样不仅可以延长机器的使用寿命,还可以节约大量的电能
  4. When the machine shuts down for a long time, the power supply should be unplugged, which can not only prolong the service life of the machine, but also save a lot of electricity.

上一篇:视觉控制系统在涂胶设备中是什么作用?
下一篇:最后一页

  • 官方微信