你现在的位置:首页>企业动态>

打胶机出现流体气泡的现象怎么办?

浏览:
  液体泡沫的一个主要影响因素胶的质量,如果你能保证在配药行业,没有胶水的问题,它可以保证数量和质量的锂电池包装,没有液体泡沫,当然,我们在系统中一直致力于追求,希望有一天的产量没有任何胶水点胶机。
  The main factor of the liquid foam is the quality of the glue. If you can guarantee that there is no glue problem in the dispensing industry, it can guarantee the quantity and quality of the lithium battery packaging, no liquid foam, and of course, we have been pursuing in the system, hoping that one day's output will not have any glue dispensing machine.
  什么是封装
  What is encapsulation
  封装是当地一个密封或粘合剂,让外部的东西,这是封装、信道分配机用于锂电池可以避免电池漏液包装,也会使电池寿命更长,前提是不能出现液体泡沫,否则会导致锂电池爆破,经常出现一次电池爆炸的原因。
  Encapsulation is a local seal or adhesive, so that external things, which are encapsulated, channel distribution machine for lithium batteries can avoid battery leakage packing, and also make the battery life longer. The premise is that no liquid foam can occur, otherwise it will lead to lithium battery explosion, and there is often a battery explosion.
  第二,分配机制
  Secondly, distribution mechanism
  通道配药机是我们的系统开发的中、高端塑料设备,全部采用不锈钢机身,每一个角落切机、研磨机的方法,看似普通,实际上使用大量的高端技术,为什么一些配药机买更贵,这是原因,使用高端技术,能够在完成作业也是非常高的,完成锂电池封装后可选择通道分配器进行生产。
双组份打胶机
  Channel dispensing machine is our system development of medium and high-end plastic equipment, all using stainless steel fuselage, every corner of the cutting machine, grinding machine method, seemingly ordinary, in fact, the use of a large number of high-end technology, why some dispensing machine is more expensive, this is the reason, the use of high-end technology, can complete the operation is also very high. After lithium battery packaging, channel distributor can be selected for production.
  第三,液泡对配药的影响
  Thirdly, the effect of vacuoles on dispensing
  液体泡沫会影响胶的量的大小,通常在通道调剂调剂前将机器在一个恒定的程序设计好胶的时刻,如果有泡沫,胶水的量将会改变,在锂电池包装不会有胶水,和跟踪变化将导致产品缺陷,如何处理?首先,将分配器的管胶全部取出,然后采用离心搅拌的方法,这是一种很好的处理方法。
  Liquid foam will affect the size of the glue. Usually when the machine is in a constant program before the channel is dispensed, the amount of glue will change. If there is a foam, there will be no glue in the lithium battery pack, and tracking changes will lead to product defects and how to deal with it. First, remove all the tube glue from the distributor. Then centrifugal stirring method is used, which is a good treatment method.
  这些都是给你的,希望对你有帮助。
  These are for you. I hope they will help you.

上一篇:双组份打胶机怎么防止胶水沉淀?
下一篇:自动点胶机的点胶效果由什么决定?

  • 官方微信